AC519 is a fully automatic intelligent automobile air conditioning maintenance equipment that integrates functions such as disassembly-free cleaning, refrigerant recovery, filling, and vacuuming. It can effectively improve the problems of poor air conditioning cooling effect, large compressor load, high noise, and high fuel consumption.
contact
|
Functions |
Description |
√ |
|
Air-conditioning pipeline cleaning |
Clean the air-conditioning pipelines, remove sludge, powder and other impurities inside the pipelines, replace the refrigeration oil more thoroughly, improve compressor lubrication, and improve the refrigeration performance of the air-conditioning system. |
√ |
|
Refrigerant recovery |
The refrigerant in the automobile air conditioning system is purified and regenerated and then recycled into the working tank to meet the standards for reuse. |
√ |
|
Vacuuming |
Achieve vacuuming of air conditioning pipelines and equipment pipelines. |
√ |
|
Refrigeration oil filling |
Supports manual/automatic filling, and realizes intelligent and precise filling through the built-in electronic scale. |
√ |
|
Refrigerant filling |
Add refrigerant to the vehicle according to the set filling amount. |
√ |
|
Automatic mode |
According to the set parameters, automatically perform cleaning, recovery, vacuuming, filling of refrigeration oil, and lnject refrigerant and other operations. |
√ |
|
Database |
Equipped with automobile refrigerant model database, supports database calling, no manual setting is required. |
√ |
|
Print |
Supports printing of device execution results. |
√ |
|
Power supply |
AC110V/AC220V 50Hz/60Hz |
Recycling capacity |
Gaseous state: 400g/min, Liquid state:700g/min |
|
Main engine power |
700W |
Vacuum pump capacity |
2pa |
|
Working temperature |
10~50°C |
Tank |
12L |
|
Electronic scale accuracy |
士10g |
Filling rate |
800g/min |
Exchange dry filter: The dry filter must be exchanged when it reaches lifetime. If not exchange the dry-filter timely, it will not be able to run the recovery, flushing and supplying functions.
Clean pipe of the unit: After a period of use, such as 2 months, it should be run. It can clean up the pipe line of the machine.
Calibration of load cell: When the load cell is not precise, it needs to be calibrated.
Change vacuum pump oil: When the pump oil becomes cream or machine displays a maintenance message, the vacuum pump oil must be changed. If not change the pump oil in time, the vacuum pump will be easily damaged.
