JUMPER3_Euro 5 | Euro 6 Front Camera Calibration

Function Description:

The front camera needs to be calibrated in the following cases

(1) The vehicle has the following failure records (no or wrong basic settings/adaptation)

• Camera not calibrated or incorrectly calibrated

(2) Vehicle components are overhauled and replaced as follows:

• Replace the controller
• Removed and reinstalled or replaced windshield
• Updated one of the vehicle height sensors for the height control system

Measured model:

JUMPER3_Euro 5 | Euro 6

Operation guide:

1. Automatically identify and enter through ADAS calibration entrance VIN.

2. Select ADAS Calibration.

3. Automatically recognize JUMPER3_Euro 5 | Euro 6 models.

4. After selecting ADAS System Select, click Lane Wandering Alert to enter the system.

5. Select the path ADAS Calibration-> Calibrating The Front Camera, click to enter.

6. Select the ADAS MOBILE target, read the prompts and get ready, click OK.

7. After completing the operation according to the prompts, click Next Step.

8. After completing the operation according to the prompts, click Next Step.

9. After completing the operation according to the prompts, click Next Step.

10. After completing the operation according to the prompts, click Next Step.

11. After completing the operation according to the prompts, click Next Step.

12. After completing the operation according to the prompts, click Next Step.

13. After completing the operation according to the prompts, click Next Step.

14. After completing the prompts according to the operation, click the NEXT button to perform the calibration function, turn off the ignition after the prompts appear, and then click OK.

15. After turning on the ignition according to the prompt, click OK.

16. Display Calibration successful, click OK.